Other

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 9 - 80 Durometer, X-Firm

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 7 - 70 Durometer, Firm

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Replacement clamp kit for Thudbuster G4.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements

Replacement seals for servicing Cane Creek rear shocks.

Replacement seals for servicing Cane Creek rear shocks.

Thudbuster 3G Elastomer

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 3 - 50 Durometer, Soft

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Soft

110-Series Alloy Interlok Headset Spacer - Aluminum construction

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction

The Ancora Expansion Plug is designed for use with carbon steerer tubes. Machined Aluminum expansion wedges paired with a knurled sleeve ensure a secure fit with the correct preload amount. - Accepts any standard preload bolt and top cap (sold separately) - Insertion length: 46mm - Contact surface length: 38mm

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 5 - 60 Durometer, Medium

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Firm

Air Spring Volume Reduction Kit - Cane Creek Rear Shock Volume Reducer - DB Kitsuma Air

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - X-Firm

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 1 - 40 Durometer, X-Soft

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower

Allows the use of VALT springs with Fox coil shocks.

Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included