Accessories/Parts

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 32-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes

Easy-to-install foot for Thule Evo roof racks, for vehicles with integrated fixed points, T-profile, or custom install rack attachment points. - Easy-to-install roof rack feet - For Thule Evo roof racks systems - For vehicles with integrated fixed points Features: - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with integrated fixed points, T-profile, or custom install rack attachment points - Secures to vehicle with Thule One-Key locks (sold separately) - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Check the Thule Buyer's Guide to find out which roof rack fits your car - Add Thule Fixpoint Kit Cover (sold separately) for a quick rack mounting solution - Maximum load: 220 lb. Please also check the maximum roof load capacity of your vehicle.

Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars NISSAN - Frontier 4-dr King Cab with Normal Roof 2005 - 2018 - Frontier 4-dr Crew Cab with Normal Roof 2005 - 2019

Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier. - Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers - 250 lbs weight limit carrying capacity - Provides a 2.25" drop for improved tailgate/rear door clearance - Bolt fixation to vehicle - Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)

Protect your rides

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

Easy-to-install foot for Thule Edge roof racks, for vehicles with integrated fixed points, T-profile, or custom install rack attachment points. - Easy-to-install roof rack feet - For Thule Edge roof rack systems - For vehicles with integrated fixed points Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with integrated fixed points, T-profile, or custom install rack attachment points - Secures to vehicle with Thule One-Key locks (sold separately) - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Add Thule Fixpoint Kit Cover (sold separately) for a quick rack mounting solution - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Rear wheel strap for Boa bike mount. Includes one strap.